Posts Tagged ‘gt 4’

How To Test An Air Bed For Leaks

星期日, 05月 20th, 2012
baby girl bedding

1

Fill a spray bottle with water and several drops of dishwashing soap. Inflate your air bed, and spray the bed with the soapy mixture. Concentrate on particular areas like seams and fill spouts first. After spraying, watch for soap bubbles to determine where the leak is coming from.

2

Lay tissue paper on an inflated air bed. Cover 1 side first and listen for any air hissing against the paperHow to Test an Air Bed http://babygirlbeddingsite.com for Leaks, or appear for ripples as the air escapes from the bed. Flip the bed more than and do

Find Baby Girl Bedding

the same for the back, and even flip the bed on its side so you can drape tissue paper over the ends and check for leaking seams.

3

Fill a bathtub or a child’s pool with water, then submerge the air bed beneath the surface. Look for bubbles to confirm the area exactly where the leak is.

4

Sprinkle baby powder onto the air bed, and watch for little “puffs” of powder exactly where it comes into contact with the leaking airHow to Test an Air Bed for Leaks.

5

Fill the air bed with approximately 1/2 gallon of water. The water will seep out of any hole that leaks air, so look for any wetness on the outside in the air bed to determine exactly where the leak is coming from.

How To Test An Air Bed For Leaks

Related Articles:

Good Colors For Baby Nurseries

How To Convert A Delta Concordia Crib To A Daybed

How To Remodel A Nursery Room

How To Choose A Crib Mattress

How To Decorate A Nursery For Twins

How To Prevent Climbing Out Of Cribs

星期三, 05月 16th, 2012

How To Decorate A Nursery Using Pink &Amp; Brown | babyboybeddingonline.com

1

Adjust the crib’s mattress to its lowest position as soon as a child can pull itself to a standing position. Leave at least 26 inches between the mattress and the top of the crib’s drop side.

2

Remove all toys or bumper pads from the crib to avoid giving the child a way to climb up and outHow to Prevent Climbing Out
preparing a infant boy bedding
of Cribs.

3

Attach a crib tent or net over the top of the crib to prevent the child from climbing out. Crib tents or nets also help keep household pets

babygirlbeddingsite.com

or insects out of the crib. Purchase a crib tent or net at bedding or specialty baby stores. Look for one that has weave of less than 1/4 inchHow to Prevent Climbing Out of Cribs.

4

Transition your child to an age-appropriate toddler bed if the climbing persists. Pregnancy.org recommends letting the child pick the bed, then placing the bed where the crib used to be and putting familiar blankets on the bed to make the child’s transition less stressful for both parties.

How To Prevent Climbing Out Of Cribs

How To Remove The Agitator On A Hotpoint Washing Machine

星期日, 05月 13th, 2012

1

Unplug your Hotpoint washing machine from the electrical outlet. Lift the hood open to expose the tub and agitator.

2

Pry the cap off the top
http://bestwashingmachinex.com
with the agitator. Look closely at the best from the agitator and should see the line where the agitator ends along with the cap beginsHow to Remove the Agitator on a Hotpoint Washing Machine. Gently press the screwdriver along the capline. You should be able

Remove washing machine odor

to wedge the screwdriver in enough to pry the cap off the best in the agitator.

3

Remove the agitator bold holding it to the agitator columnHow to Get rid of the Agitator on a Hotpoint Washing Machine. Depending on the model, this could be held in location having a hex or an Allen bolt. Use the suitable tool (wrench or Allan wrench) to take away. Set the screw aside.

4

Place your hands underneath the agitator and pull upward. This may take several attempts, as the agitators are sometimes stuck on very firmly. Preserve your head away from the agitator when pulling upward.

How To Remove The Agitator On A Hotpoint Washing Machine

How To Make A Portable Washing Machine Kit | http://bestwashingmachinex.com